if the conditions for OD-11 connection has changed and the led is continuously flashing yellow please enter config mode and setup the speaker again.
to enter config mode please do the following:
- make sure OD-11 is on and led is flashing yellow
- press and hold both the + and - buttons located on the OD‑11 base, for 5 seconds.
- make sure the led turns constant yellow.
OD‑11 is now in config mode, and is ready to be setup again:
please follow these steps carefully and with patience. multiple tries may be required.
if it still doesn't work, as a last resort, please see the OD-11 technical guide.