if the conditions for OD–11 connection has changed and the led is continuously flashing yellow please enter config mode and setup the speaker again. to enter config mode please do the following:
- make sure OD–11 is on and led is flashing yellow
- press and hold both the + and - buttons located on the OD–11 base, for 5 seconds.
- make sure the led turns constant yellow.
OD–11 is now in config mode, and is ready to be setup again:
please follow these steps carefully and with patience. multiple tries may be required.
if it still doesn't work, as a last resort, please see the OD–11 technical guide.