the computer–1’s audio module consists of a TRS connector that can be wired to the audio header of a motherboard. to do so, please follow the scheme below:
|
computer–1 |
|
board |
|
T (tip) |
|
L (left channel) |
|
R (ring) |
|
R (right channel) |
|
S (sleeve) |
|
G (ground) |
some boards can have ’hd audio mode’ activated by default. you might need to disable it and enable ’ac97 mode’ instead, in order to make the audio port work.
you can usually access these preferences from the bios. please refer to the manual of your board to find out more, and don’t hesitate to contact our support team if some help is needed.